Index
Unable to connect to wifi network in live session - Printable Version

+- Index (http://forums.netrunner.com)
+-- Forum: Netrunner Debian (http://forums.netrunner.com/forumdisplay.php?fid=75)
+--- Forum: Plasma Desktop (http://forums.netrunner.com/forumdisplay.php?fid=80)
+--- Thread: Unable to connect to wifi network in live session (/showthread.php?tid=24054)



Unable to connect to wifi network in live session - Dah65 - 25th January 2017

Hi! First of all, thanks for Netrunner and Maui (the latter is the distro I currently use).

I would like to switch to Netrunner Desktop, because I like very much Debian (which I used before), and the idea of having a rolling distro.

But when I try Netrunner Desktop I am unable to connect to my wifi. I have two wifi sticks, one with chipset Atheros (module ath9k), and the other with Ralink (module rt73usb), but none of them works. In konsole I made "sudo modprobe -v ath9k", and "sudo modprobe -v rt73usb", without success.

When I read that Netrunner Destop 17.01.2 was released including some additional firmware, I downloaded the iso, but the issue still persists.

With Maui everything worked like a charm (well, maybe I had to do "sudo modprobe ath9k", not sure now), so it was a big surprise to have this trouble with Netrunner.

Any suggestion?

Thanks in advance.


RE: Unable to connect to wifi network in live session - starbuck - 25th January 2017

Is the "firmware-atheros" package installed on your system?


RE: Unable to connect to wifi network in live session - Dah65 - 26th January 2017

Linux Netrunner Desktop 17.02 wifi issues

As you can see in the video screencast of a live session, firmware-atheros is shown with a green mark in synaptic, I have made a "sudo modprobe -v ath9k", my wifi network (ONO_7B) is properly configured, but still I cannot make the connection.

Indeed, I think it is strange that several wifi networks were detected, so I thought that the device was recognized and worked well, but at the end it wasn't.

If you need more information, please ask for it.


RE: Unable to connect to wifi network in live session - leszek - 26th January 2017

Is the network really configured correctly? Did you get a valid ip address from the access point / router when connecting from another device?

Which atheros chip do you have ? (You can check with the terminal command inxi -v 2)

Also can you show the output of sudo dmesg right after you tried connecting to your wifi.

Please use quote or code tags for this output when posting to this forum Smile


RE: Unable to connect to wifi network in live session - Dah65 - 27th January 2017

Is the network really configured correctly? Did you get a valid ip address from the access point / router when connecting from another device?

Yes. In fact, right now I'm writing from the same PC, which has Maui installed. A laptop, dual boot Windows 7/Maui, has no trouble, as well as 2 smartphones with Android 5.

A second laptop (with Sparky Linux, a Debian Testing based distro), showed the same behaviour that Netrunner Desktop for a while, but the problem disappeared when I upgraded via ethernet. With this fact in mind, I have downloaded network-manager_1.4.4-1_amd64 and wpasupplicant_2.5-2+v2.4-3+b1_amd64 from Debian Testing repos, in case the issue were a bug in one of those two packages, and installed them in the live session of Netrunner Desktop, without success.

Which atheros chip do you have ? (You can check with the terminal command inxi -v 2)


Code:
live@live-pc:~$ inxi -v 2
System:    Host: live-pc Kernel: 4.8.0-1-amd64 x86_64 (64 bit) Desktop: KDE Plasma 5.8.2
          Distro: Netrunner 17.01 - Baryon
Machine:   Device: desktop Mobo: MEDIONPC model: MS-7366 v: 2.2 BIOS: American Megatrends v: A7366MLN.20F date: 01/24/2008
CPU:       Dual core Intel Pentium Dual E2180 (-MCP-) speed/max: 1603/2003 MHz
Graphics:  Card: NVIDIA C73 [GeForce 7100 / nForce 630i]
          Display Server: X.Org 1.19.0 drivers: nouveau (unloaded: fbdev,vesa) Resolution: 1440x900@59.89hz
          GLX Renderer: Gallium 0.4 on llvmpipe (LLVM 3.9, 128 bits) GLX Version: 3.0 Mesa 13.0.2
Network:   Card-1: NVIDIA MCP73 Ethernet driver: forcedeth
          Card-2: Atheros AR9271 802.11n driver: ath9k_htc
Drives:    HDD Total Size: NA (-)
          ID-1: model: WDC_WD2500AAJS
          ID-2: model: Flash_Disk
Info:      Processes: 190 Uptime: 2 min Memory: 506.7/2759.7MB Client: Shell (bash) inxi: 2.3.4
live@live-pc:~$

Also can you show the output of sudo dmesg right after you tried connecting to your wifi.


Code:
live@live-pc:~$ sudo dmesg
[    0.000000] Linux version 4.8.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 5.4.1 20161019 (Debian 5.4.1-3) ) #1 SMP Debian 4.8.7-1 (2016-11-13)
[    0.000000] Command line: BOOT_IMAGE=/live/vmlinuz boot=live hostname=live-pc username=live live-config.user-default-groups=sambashare,cdrom,floppy,audio,dip,video,plugdev,netdev,lpadmin,scanner,bluetooth,adm quiet splash initrd=/live/initrd.img nouveau.noaccel=1
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000affaffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000affb0000-0x00000000affbdfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000affbe000-0x00000000affeffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000afff0000-0x00000000afffdfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.5 present.
[    0.000000] DMI: MEDIONPC MS-7366/MS-7366, BIOS A7366MLN.20F 01/24/2008
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0xaffb0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-DFFFF uncachable
[    0.000000]   E0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff9e60400ff780]
[    0.000000] Base memory trampoline at [ffff9e6040099000] 99000 size 24576
[    0.000000] BRK [0xa314c000, 0xa314cfff] PGTABLE
[    0.000000] BRK [0xa314d000, 0xa314dfff] PGTABLE
[    0.000000] BRK [0xa314e000, 0xa314efff] PGTABLE
[    0.000000] BRK [0xa314f000, 0xa314ffff] PGTABLE
[    0.000000] BRK [0xa3150000, 0xa3150fff] PGTABLE
[    0.000000] BRK [0xa3151000, 0xa3151fff] PGTABLE
[    0.000000] BRK [0xa3152000, 0xa3152fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x7cecf000-0x7fffffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F9EB0 000014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 0x00000000AFFB0000 000048 (v01 MEDION MEDIONAG 20080124 MSFT 00000097)
[    0.000000] ACPI: FACP 0x00000000AFFB0200 000084 (v01 012408 FACP1000 20080124 MSFT 00000097)
[    0.000000] ACPI: DSDT 0x00000000AFFB0620 004C50 (v01 1ADSY  1ADSY002 00000002 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000AFFBE000 000040
[    0.000000] ACPI: APIC 0x00000000AFFB0390 000080 (v01 012408 APIC1000 20080124 MSFT 00000097)
[    0.000000] ACPI: MCFG 0x00000000AFFB0410 00003C (v01 012408 OEMMCFG  20080124 MSFT 00000097)
[    0.000000] ACPI: SLIC 0x00000000AFFB0450 000176 (v01 MEDION MEDIONAG 20080124 MSFT 00000097)
[    0.000000] ACPI: WDRT 0x00000000AFFB05D0 000047 (v01 012408 NV-WDRT  20080124 MSFT 00000097)
[    0.000000] ACPI: OEMB 0x00000000AFFBE040 000071 (v01 012408 OEMB1000 20080124 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000AFFB5270 000038 (v01 012408 OEMHPET0 20080124 MSFT 00000097)
[    0.000000] ACPI: NVHD 0x00000000AFFBE0C0 000554 (v01 012408 NVHDCP   20080124 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x00000000AFFBEF40 000A7C (v01 DpgPmm CpuPm    00000012 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000000affaffff]
[    0.000000] NODE_DATA(0) allocated [mem 0xaffab000-0xaffaffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000affaffff]
[    0.000000]   Normal   empty
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000affaffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000000affaffff]
[    0.000000] On node 0 totalpages: 720718
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11199 pages used for memmap
[    0.000000]   DMA32 zone: 716720 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] e820: [mem 0xafffe000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 35 pages/cpu @ffff9e60efc00000 s103384 r8192 d31784 u524288
[    0.000000] pcpu-alloc: s103384 r8192 d31784 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 709434
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/live/vmlinuz boot=live hostname=live-pc username=live live-config.user-default-groups=sambashare,cdrom,floppy,audio,dip,video,plugdev,netdev,lpadmin,scanner,bluetooth,adm quiet splash initrd=/live/initrd.img nouveau.noaccel=1
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 2772868K/2882872K available (6097K kernel code, 1165K rwdata, 2828K rodata, 1372K init, 800K bss, 110004K reserved, 0K cma-reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000]  RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:456 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1999.851 MHz processor
[    0.004013] Calibrating delay loop (skipped), value calculated using timer frequency.. 3999.70 BogoMIPS (lpj=7999404)
[    0.004017] pid_max: default: 32768 minimum: 301
[    0.004046] ACPI: Core revision 20160422
[    0.012723] ACPI: 2 ACPI AML tables successfully acquired and loaded

[    0.012802] Security Framework initialized
[    0.012804] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.012813] AppArmor: AppArmor disabled by boot time parameter
[    0.013182] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.015652] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.016940] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.016948] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.017502] CPU: Physical Processor ID: 0
[    0.017504] CPU: Processor Core ID: 0
[    0.017506] mce: CPU supports 6 MCE banks
[    0.017514] CPU0: Thermal monitoring enabled (TM2)
[    0.017521] process: using mwait in idle threads
[    0.017527] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.017528] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.017947] Freeing SMP alternatives memory: 24K (ffffffff8887c000 - ffffffff88882000)
[    0.020832] ftrace: allocating 24996 entries in 98 pages
[    0.028195] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.028198] smpboot: Max logical packages: 2
[    0.032393] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.076000] smpboot: CPU0: Intel(R) Pentium(R) Dual  CPU  E2180  @ 2.00GHz (family: 0x6, model: 0xf, stepping: 0xd)
[    0.076000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[    0.076000] core: PEBS disabled due to CPU errata
[    0.076000] ... version:                2
[    0.076000] ... bit width:              40
[    0.076000] ... generic registers:      2
[    0.076000] ... value mask:             000000ffffffffff
[    0.076000] ... max period:             000000007fffffff
[    0.076000] ... fixed-purpose events:   3
[    0.076000] ... event mask:             0000000700000003
[    0.076000] x86: Booting SMP configuration:
[    0.076000] .... node  #0, CPUs:      #1
[    0.154031] x86: Booted up 1 node, 2 CPUs
[    0.154031] smpboot: Total of 2 processors activated (7999.56 BogoMIPS)
[    0.154031] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.154031] devtmpfs: initialized
[    0.154031] x86/mm: Memory block size: 128MB
[    0.157554] PM: Registering ACPI NVS region [mem 0xaffbe000-0xaffeffff] (204800 bytes)
[    0.157636] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.157684] pinctrl core: initialized pinctrl subsystem
[    0.157866] NET: Registered protocol family 16
[    0.168008] cpuidle: using governor ladder
[    0.184006] cpuidle: using governor menu
[    0.184093] ACPI: bus type PCI registered
[    0.184096] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.184225] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.184227] PCI: not using MMCONFIG
[    0.184229] PCI: Using configuration type 1 for base access
[    0.200070] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.200091] ACPI: Added _OSI(Module Device)
[    0.200092] ACPI: Added _OSI(Processor Device)
[    0.200093] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.200095] ACPI: Added _OSI(Processor Aggregator Device)
[    0.200451] ACPI: Executed 1 blocks of module-level executable AML code
[    0.206043] ACPI: Dynamic OEM Table Load:
[    0.206050] ACPI: SSDT 0xFFFF9E60EB999000 000235 (v01 DpgPmm P001Ist  00000011 INTL 20051117)
[    0.206608] ACPI: Dynamic OEM Table Load:
[    0.206614] ACPI: SSDT 0xFFFF9E60EB999400 000235 (v01 DpgPmm P002Ist  00000012 INTL 20051117)
[    0.207627] ACPI: Interpreter enabled
[    0.207648] ACPI: (supports S0 S3 S4 S5)
[    0.207650] ACPI: Using IOAPIC for interrupt routing
[    0.207694] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.208991] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.209012] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.216964] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.216971] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.217208] acpi PNP0A03:00: _OSC: platform does not support [PCIeCapability]
[    0.217317] acpi PNP0A03:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[    0.217320] acpi PNP0A03:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[    0.217322] acpi PNP0A03:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[    0.217324] acpi PNP0A03:00: _OSC failed (AE_SUPPORT); disabling ASPM
[    0.217612] PCI host bridge to bus 0000:00
[    0.217615] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.217617] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.217619] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.217621] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[    0.217622] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window]
[    0.217624] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window]
[    0.217626] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.217642] pci 0000:00:00.0: [10de:07c1] type 00 class 0x060000
[    0.217829] pci 0000:00:00.1: [10de:07cb] type 00 class 0x050000
[    0.218028] pci 0000:00:01.0: [10de:07cd] type 00 class 0x050000
[    0.218220] pci 0000:00:01.1: [10de:07ce] type 00 class 0x050000
[    0.218410] pci 0000:00:01.2: [10de:07cf] type 00 class 0x050000
[    0.218600] pci 0000:00:01.3: [10de:07d0] type 00 class 0x050000
[    0.218791] pci 0000:00:01.4: [10de:07d1] type 00 class 0x050000
[    0.218981] pci 0000:00:01.5: [10de:07d2] type 00 class 0x050000
[    0.219172] pci 0000:00:01.6: [10de:07d3] type 00 class 0x050000
[    0.219364] pci 0000:00:02.0: [10de:07d6] type 00 class 0x050000
[    0.219558] pci 0000:00:03.0: [10de:07d7] type 00 class 0x060100
[    0.219568] pci 0000:00:03.0: reg 0x10: [io  0x4f00-0x4fff]
[    0.219704] pci 0000:00:03.1: [10de:07d8] type 00 class 0x0c0500
[    0.219717] pci 0000:00:03.1: reg 0x10: [io  0x4900-0x493f]
[    0.219741] pci 0000:00:03.1: reg 0x20: [io  0x4d00-0x4d3f]
[    0.219748] pci 0000:00:03.1: reg 0x24: [io  0x4e00-0x4e3f]
[    0.219784] pci 0000:00:03.1: PME# supported from D3hot D3cold
[    0.219832] pci 0000:00:03.1: System wakeup disabled by ACPI
[    0.219896] pci 0000:00:03.2: [10de:07d9] type 00 class 0x050000
[    0.220041] pci 0000:00:03.3: [10de:07da] type 00 class 0x0b4000
[    0.220062] pci 0000:00:03.3: reg 0x10: [mem 0xfea80000-0xfeafffff]
[    0.220265] pci 0000:00:03.4: [10de:07c8] type 00 class 0x050000
[    0.220457] pci 0000:00:04.0: [10de:07fe] type 00 class 0x0c0310
[    0.220469] pci 0000:00:04.0: reg 0x10: [mem 0xfea7f000-0xfea7ffff]
[    0.220525] pci 0000:00:04.0: supports D1 D2
[    0.220526] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.220570] pci 0000:00:04.0: System wakeup disabled by ACPI
[    0.220633] pci 0000:00:04.1: [10de:056a] type 00 class 0x0c0320
[    0.220647] pci 0000:00:04.1: reg 0x10: [mem 0xfea7ec00-0xfea7ecff]
[    0.220708] pci 0000:00:04.1: supports D1 D2
[    0.220710] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.220754] pci 0000:00:04.1: System wakeup disabled by ACPI
[    0.220829] pci 0000:00:08.0: [10de:056c] type 00 class 0x01018a
[    0.220862] pci 0000:00:08.0: reg 0x20: [io  0xffa0-0xffaf]
[    0.220876] pci 0000:00:08.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.220878] pci 0000:00:08.0: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.220880] pci 0000:00:08.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.220881] pci 0000:00:08.0: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.220992] pci 0000:00:09.0: [10de:07fc] type 00 class 0x040300
[    0.221005] pci 0000:00:09.0: reg 0x10: [mem 0xfea78000-0xfea7bfff]
[    0.221066] pci 0000:00:09.0: PME# supported from D3hot D3cold
[    0.221110] pci 0000:00:09.0: System wakeup disabled by ACPI
[    0.221171] pci 0000:00:0a.0: [10de:056d] type 01 class 0x060401
[    0.221247] pci 0000:00:0a.0: System wakeup disabled by ACPI
[    0.221310] pci 0000:00:0b.0: [10de:056e] type 01 class 0x060400
[    0.221356] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.221400] pci 0000:00:0b.0: System wakeup disabled by ACPI
[    0.221465] pci 0000:00:0c.0: [10de:056f] type 01 class 0x060400
[    0.221508] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.221554] pci 0000:00:0c.0: System wakeup disabled by ACPI
[    0.221616] pci 0000:00:0d.0: [10de:056f] type 01 class 0x060400
[    0.221663] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.221708] pci 0000:00:0d.0: System wakeup disabled by ACPI
[    0.221769] pci 0000:00:0e.0: [10de:07f4] type 00 class 0x010601
[    0.221780] pci 0000:00:0e.0: reg 0x10: [io  0xe480-0xe487]
[    0.221786] pci 0000:00:0e.0: reg 0x14: [io  0xe400-0xe403]
[    0.221793] pci 0000:00:0e.0: reg 0x18: [io  0xe080-0xe087]
[    0.221799] pci 0000:00:0e.0: reg 0x1c: [io  0xe000-0xe003]
[    0.221805] pci 0000:00:0e.0: reg 0x20: [io  0xdc00-0xdc0f]
[    0.221811] pci 0000:00:0e.0: reg 0x24: [mem 0xfea7c000-0xfea7dfff]
[    0.221931] pci 0000:00:0f.0: [10de:07dc] type 00 class 0x020000
[    0.221943] pci 0000:00:0f.0: reg 0x10: [mem 0xfea77000-0xfea77fff]
[    0.221950] pci 0000:00:0f.0: reg 0x14: [io  0xd880-0xd887]
[    0.221956] pci 0000:00:0f.0: reg 0x18: [mem 0xfea7e800-0xfea7e8ff]
[    0.221962] pci 0000:00:0f.0: reg 0x1c: [mem 0xfea7e400-0xfea7e40f]
[    0.222006] pci 0000:00:0f.0: supports D1 D2
[    0.222008] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.222056] pci 0000:00:0f.0: System wakeup disabled by ACPI
[    0.222121] pci 0000:00:10.0: [10de:07e1] type 00 class 0x030000
[    0.222132] pci 0000:00:10.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[    0.222140] pci 0000:00:10.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.222149] pci 0000:00:10.0: reg 0x1c: [mem 0xfc000000-0xfcffffff 64bit]
[    0.222159] pci 0000:00:10.0: reg 0x30: [mem 0xfea40000-0xfea5ffff pref]
[    0.222369] pci 0000:00:0a.0: PCI bridge to [bus 01] (subtractive decode)
[    0.222376] pci 0000:00:0a.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.222378] pci 0000:00:0a.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.222380] pci 0000:00:0a.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.222382] pci 0000:00:0a.0:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[    0.222384] pci 0000:00:0a.0:   bridge window [mem 0xc0000000-0xdfffffff window] (subtractive decode)
[    0.222386] pci 0000:00:0a.0:   bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode)
[    0.222436] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    0.222489] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    0.222560] pci 0000:04:00.0: [197b:2380] type 00 class 0x0c0010
[    0.222583] pci 0000:04:00.0: reg 0x10: [mem 0xfebff800-0xfebfffff]
[    0.222598] pci 0000:04:00.0: reg 0x14: [mem 0xfebff400-0xfebff47f]
[    0.222637] pci 0000:04:00.0: reg 0x20: [mem 0xfebff000-0xfebff07f]
[    0.222652] pci 0000:04:00.0: reg 0x24: [mem 0xfebfec00-0xfebfec7f]
[    0.232021] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    0.232030] pci 0000:00:0d.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.233288] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[    0.233436] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[    0.233582] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    0.233726] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    0.233870] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
[    0.234015] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
[    0.234158] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[    0.234305] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
[    0.234454] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
[    0.234601] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
[    0.234747] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *7
[    0.234893] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *7
[    0.235040] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *10
[    0.235193] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[    0.235344] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *7
[    0.235495] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
[    0.235659] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[    0.235887] vgaarb: setting as boot device: PCI:0000:00:10.0
[    0.235887] vgaarb: device added: PCI:0000:00:10.0,decodes=io+mem,owns=io+mem,locks=none
[    0.235887] vgaarb: loaded
[    0.235887] vgaarb: bridge control possible 0000:00:10.0
[    0.236035] PCI: Using ACPI for IRQ routing
[    0.242320] PCI: pci_cache_line_size set to 64 bytes
[    0.242417] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.242419] e820: reserve RAM buffer [mem 0xaffb0000-0xafffffff]
[    0.244065] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.244070] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    0.244075] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    0.246110] clocksource: Switched to clocksource hpet
[    0.255673] VFS: Disk quotas dquot_6.6.0
[    0.255726] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.255902] pnp: PnP ACPI init
[    0.256457] pnp 00:00: [dma 0 disabled]
[    0.256568] pnp 00:00: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.257245] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    0.257248] system 00:01: [io  0x0800-0x080f] has been reserved
[    0.257250] system 00:01: [io  0x4000-0x407f] has been reserved
[    0.257252] system 00:01: [io  0x4080-0x40ff] has been reserved
[    0.257255] system 00:01: [io  0x4400-0x447f] has been reserved
[    0.257257] system 00:01: [io  0x4480-0x44ff] has been reserved
[    0.257259] system 00:01: [io  0x4800-0x487f] has been reserved
[    0.257262] system 00:01: [io  0x4880-0x48ff] has been reserved
[    0.257264] system 00:01: [mem 0x000d0000-0x000d3fff window] has been reserved
[    0.257267] system 00:01: [mem 0x000d4000-0x000d7fff window] has been reserved
[    0.257269] system 00:01: [mem 0x000de000-0x000dffff window] has been reserved
[    0.257272] system 00:01: [mem 0xfed02000-0xfed03fff] has been reserved
[    0.257275] system 00:01: [mem 0xfed04000-0xfed04fff] has been reserved
[    0.257277] system 00:01: [mem 0xfee01000-0xfeefffff] has been reserved
[    0.257282] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.257384] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.257535] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.257537] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.257541] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.257620] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.257804] system 00:05: [io  0x0a00-0x0adf] has been reserved
[    0.257806] system 00:05: [io  0x0ae0-0x0aef] has been reserved
[    0.257810] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.257924] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[    0.257928] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.258142] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.258145] system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.258147] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.258150] system 00:07: [mem 0x00100000-0xbfffffff] could not be reserved
[    0.258152] system 00:07: [mem 0xfec00000-0xffffffff] could not be reserved
[    0.258155] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.258503] pnp: PnP ACPI: found 8 devices
[    0.266329] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.266371] pci 0000:00:0a.0: PCI bridge to [bus 01]
[    0.266381] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    0.266389] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    0.266396] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    0.266400] pci 0000:00:0d.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.266406] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.266408] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.266410] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.266412] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.266414] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff window]
[    0.266416] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff window]
[    0.266418] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7 window]
[    0.266420] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff window]
[    0.266422] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.266424] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.266425] pci_bus 0000:01: resource 8 [mem 0xc0000000-0xdfffffff window]
[    0.266427] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfebfffff window]
[    0.266429] pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.266506] NET: Registered protocol family 2
[    0.266779] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.266914] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.267122] TCP: Hash tables configured (established 32768 bind 32768)
[    0.267229] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.267265] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.267423] NET: Registered protocol family 1
[    0.267909] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[    0.352475] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    0.352629] pci 0000:00:10.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.352634] PCI: CLS 64 bytes, default 64
[    0.352727] Unpacking initramfs...
[    1.446807] Freeing initrd memory: 50372K (ffff9e60bcecf000 - ffff9e60c0000000)
[    1.447625] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    1.447684] audit: initializing netlink subsys (disabled)
[    1.447721] audit: type=2000 audit(1485542818.444:1): initialized
[    1.448243] Initialise system trusted keyrings
[    1.448371] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[    1.448390] zbud: loaded
[    1.518984] Key type asymmetric registered
[    1.518986] Asymmetric key parser 'x509' registered
[    1.519022] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    1.519066] io scheduler noop registered
[    1.519067] io scheduler deadline registered
[    1.519075] io scheduler cfq registered (default)
[    1.519476] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.519484] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.519509] intel_idle: does not run on family 6 model 15
[    1.519673] GHES: HEST is not enabled!
[    1.519765] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.540249] 00:00: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    1.540884] Linux agpgart interface v0.103
[    1.540975] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.540976] AMD IOMMUv2 functionality not available on this system
[    1.541238] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    1.541239] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.541987] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.542157] mousedev: PS/2 mouse device common for all mice
[    1.542220] rtc_cmos 00:02: RTC can wake from S4
[    1.542403] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.542439] rtc_cmos 00:02: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    1.542471] ledtrig-cpu: registered to indicate activity on CPUs
[    1.543099] NET: Registered protocol family 10
[    1.543412] mip6: Mobile IPv6
[    1.543415] NET: Registered protocol family 17
[    1.543418] mpls_gso: MPLS GSO support
[    1.543681] microcode: sig=0x6fd, pf=0x1, revision=0xa1
[    1.543737] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.543925] registered taskstats version 1
[    1.543928] Loading compiled-in X.509 certificates
[    1.546116] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
[    1.546535] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[    1.546569] zswap: loaded using pool lzo/zbud
[    1.547111] rtc_cmos 00:02: setting system clock to 2017-01-27 18:46:59 UTC (1485542819)
[    1.547180] PM: Hibernation image not present or could not be loaded.
[    1.549190] Freeing unused kernel memory: 1372K (ffffffff88725000 - ffffffff8887c000)
[    1.549195] Write protecting the kernel read-only data: 10240k
[    1.549465] Freeing unused kernel memory: 32K (ffff9e60e29f8000 - ffff9e60e2a00000)
[    1.554240] Freeing unused kernel memory: 1268K (ffff9e60e2cc3000 - ffff9e60e2e00000)
[    1.563942] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.578038] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.586158] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.586296] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.586311] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.587813] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.587872] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.589209] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.589234] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.589711] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.589804] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.589886] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.630751] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    1.630760] ACPI: Power Button [PWRB]
[    1.634278] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.634279] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[    1.634287] ACPI: Power Button [PWRF]
[    1.667222] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    1.667563] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21
[    1.670131] [drm] Initialized drm 1.1.0 20060810
[    1.670304] SCSI subsystem initialized
[    1.678256] ACPI: bus type USB registered
[    1.678297] usbcore: registered new interface driver usbfs
[    1.678312] usbcore: registered new interface driver hub
[    1.686786] usbcore: registered new device driver usb
[    1.686997] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 19
[    1.687207] libata version 3.00 loaded.
[    1.689416] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.691206] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.692162] ehci-pci: EHCI PCI platform driver
[    1.707285] wmi: Mapper loaded
[    1.756086] firewire_ohci 0000:04:00.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x10
[    2.197026] forcedeth 0000:00:0f.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1d:92:62:d1:0d
[    2.197029] forcedeth 0000:00:0f.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
[    2.197072] ahci 0000:00:0e.0: version 3.0
[    2.197434] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20
[    2.197479] ahci 0000:00:0e.0: controller can do NCQ, turning on CAP_NCQ
[    2.197480] ahci 0000:00:0e.0: controller can't do PMP, turning off CAP_PMP
[    2.197531] ahci 0000:00:0e.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    2.197533] ahci 0000:00:0e.0: flags: 64bit ncq sntf led clo pio
[    2.199380] scsi host0: ahci
[    2.199539] forcedeth 0000:00:0f.0 enp0s15: renamed from eth0
[    2.199819] scsi host1: ahci
[    2.200075] scsi host2: ahci
[    2.200290] scsi host3: ahci
[    2.200384] ata1: SATA max UDMA/133 abar m8192@0xfea7c000 port 0xfea7c100 irq 20
[    2.200387] ata2: SATA max UDMA/133 abar m8192@0xfea7c000 port 0xfea7c180 irq 20
[    2.200388] ata3: SATA max UDMA/133 abar m8192@0xfea7c000 port 0xfea7c200 irq 20
[    2.200390] ata4: SATA max UDMA/133 abar m8192@0xfea7c000 port 0xfea7c280 irq 20
[    2.200455] pata_amd 0000:00:08.0: version 0.4.1
[    2.202069] scsi host4: pata_amd
[    2.202330] scsi host5: pata_amd
[    2.202428] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    2.202430] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    2.202828] ehci-pci 0000:00:04.1: EHCI Host Controller
[    2.202840] ehci-pci 0000:00:04.1: new USB bus registered, assigned bus number 1
[    2.202856] ehci-pci 0000:00:04.1: debug port 1
[    2.202888] ehci-pci 0000:00:04.1: cache line size of 64 is not supported
[    2.202909] ehci-pci 0000:00:04.1: irq 22, io mem 0xfea7ec00
[    2.216072] ehci-pci 0000:00:04.1: USB 2.0 started, EHCI 1.00
[    2.216213] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.216216] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.216218] usb usb1: Product: EHCI Host Controller
[    2.216219] usb usb1: Manufacturer: Linux 4.8.0-1-amd64 ehci_hcd
[    2.216221] usb usb1: SerialNumber: 0000:00:04.1
[    2.216446] hub 1-0:1.0: USB hub found
[    2.216459] hub 1-0:1.0: 10 ports detected
[    2.217244] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 23
[    2.217474] nouveau 0000:00:10.0: NVIDIA C73 (063000a2)
[    2.217827] ohci-pci: OHCI PCI platform driver
[    2.226903] nouveau 0000:00:10.0: bios: version 05.73.32.09.10
[    2.228356] nouveau 0000:00:10.0: fb: 256 MiB of unknown memory type
[    2.278968] firewire_core 0000:04:00.0: created device fw0: GUID 01532df70010dc00, S400
[    2.279084] [TTM] Zone  kernel: Available graphics memory: 1412968 kiB
[    2.279086] [TTM] Initializing pool allocator
[    2.279094] [TTM] Initializing DMA pool allocator
[    2.279118] nouveau 0000:00:10.0: DRM: VRAM: 253 MiB
[    2.279120] nouveau 0000:00:10.0: DRM: GART: 512 MiB
[    2.279126] nouveau 0000:00:10.0: DRM: TMDS table version 1.1
[    2.279128] nouveau 0000:00:10.0: DRM: TMDS table script pointers not stubbed
[    2.279130] nouveau 0000:00:10.0: DRM: DCB version 3.0
[    2.279132] nouveau 0000:00:10.0: DRM: DCB outp 00: 01000310 00000023
[    2.279135] nouveau 0000:00:10.0: DRM: DCB outp 01: 01031322 00000080
[    2.279137] nouveau 0000:00:10.0: DRM: DCB conn 00: 0000
[    2.279139] nouveau 0000:00:10.0: DRM: DCB conn 01: 1161
[    2.279146] nouveau 0000:00:10.0: DRM: Pointer to flat panel table invalid
[    2.279536] nouveau 0000:00:10.0: DRM: Saving VGA fonts
[    2.317010] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.317012] [drm] Driver supports precise vblank timestamp query.
[    2.351202] nouveau 0000:00:10.0: DRM: allocated 1440x900 fb: 0x8000, bo ffff9e60bf64e000
[    2.351306] fbcon: nouveaufb (fb0) is primary device
[    2.362609] ata5.00: ATAPI: HL-DT-STDVD-RAM GSA-H55N, 1.02, max UDMA/66
[    2.362617] ata5: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5000000) ACPI=0x1f01f (30:900:0x11)
[    2.367288] ata5.00: configured for UDMA/66
[    2.408028] Console: switching to colour frame buffer device 180x56
[    2.412280] nouveau 0000:00:10.0: fb0: nouveaufb frame buffer device
[    2.432023] [drm] Initialized nouveau 1.3.1 20120801 for 0000:00:10.0 on minor 0
[    2.432279] ohci-pci 0000:00:04.0: OHCI PCI host controller
[    2.432292] ohci-pci 0000:00:04.0: new USB bus registered, assigned bus number 2
[    2.432351] ohci-pci 0000:00:04.0: irq 23, io mem 0xfea7f000
[    2.464029] tsc: Refined TSC clocksource calibration: 1999.948 MHz
[    2.464035] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39a7fa67d47, max_idle_ns: 881590587223 ns
[    2.494090] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.494092] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.494094] usb usb2: Product: OHCI PCI host controller
[    2.494096] usb usb2: Manufacturer: Linux 4.8.0-1-amd64 ohci_hcd
[    2.494098] usb usb2: SerialNumber: 0000:00:04.0
[    2.494339] hub 2-0:1.0: USB hub found
[    2.494358] hub 2-0:1.0: 10 ports detected
[    2.514661] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.514679] ata4: SATA link down (SStatus 0 SControl 300)
[    2.514695] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.514706] ata3: SATA link down (SStatus 0 SControl 300)
[    2.515506] ata1.00: ATA-8: WDC WD2500AAJS-00B4A0, 01.03A01, max UDMA/133
[    2.515515] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    2.515697] ata2.00: ATAPI: HL-DT-ST DVDRAM GH24NSC0, LK00, max UDMA/133
[    2.516895] ata1.00: configured for UDMA/133
[    2.517128] ata2.00: configured for UDMA/133
[    2.517198] scsi 0:0:0:0: Direct-Access     ATA      WDC WD2500AAJS-0 3A01 PQ: 0 ANSI: 5
[    2.544069] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.549199] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH24NSC0  LK00 PQ: 0 ANSI: 5
[    2.562183] scsi 4:0:0:0: CD-ROM            HL-DT-ST DVD-RAM GSA-H55N 1.02 PQ: 0 ANSI: 5
[    2.563194] ata6: port disabled--ignoring
[    2.570353] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    2.571667] sd 0:0:0:0: [sda] Write Protect is off
[    2.571671] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.571699] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.586938] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.586942] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.587271] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.598158] sr 4:0:0:0: [sr1] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.598428] sr 4:0:0:0: Attached scsi CD-ROM sr1
[    2.613469]  sda: sda1 sda2 < sda5 sda6 >
[    2.614094] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.712940] usb 1-1: New USB device found, idVendor=0cf3, idProduct=9271
[    2.712945] usb 1-1: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[    2.712948] usb 1-1: Product: USB2.0 WLAN
[    2.712951] usb 1-1: Manufacturer: ATHEROS
[    2.712959] usb 1-1: SerialNumber: 12345
[    2.780490] random: fast init done
[    2.832073] usb 1-3: new high-speed USB device number 3 using ehci-pci
[    2.984940] usb 1-3: New USB device found, idVendor=14cd, idProduct=8601
[    2.984944] usb 1-3: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[    2.984947] usb 1-3: Product: USB 2.0 Hub            
[    2.984950] usb 1-3: Manufacturer: USB Device  
[    2.985244] hub 1-3:1.0: USB hub found
[    2.985527] hub 1-3:1.0: 4 ports detected
[    3.104037] usb 1-4: new high-speed USB device number 4 using ehci-pci
[    3.348812] usb 1-4: New USB device found, idVendor=058f, idProduct=6387
[    3.348816] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.348819] usb 1-4: Product: Mass Storage
[    3.348822] usb 1-4: Manufacturer: Generic
[    3.348824] usb 1-4: SerialNumber: DA65E4F9
[    3.353084] usb-storage 1-4:1.0: USB Mass Storage device detected
[    3.353480] scsi host6: usb-storage 1-4:1.0
[    3.353620] usbcore: registered new interface driver usb-storage
[    3.354956] usbcore: registered new interface driver uas
[    3.420061] usb 1-3.4: new low-speed USB device number 5 using ehci-pci
[    3.488355] clocksource: Switched to clocksource tsc
[    3.531181] usb 1-3.4: New USB device found, idVendor=093a, idProduct=2516
[    3.531185] usb 1-3.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    3.531188] usb 1-3.4: Product: USB OPTICAL MOUSE
[    3.536983] hidraw: raw HID events driver (C) Jiri Kosina
[    3.542942] usbcore: registered new interface driver usbhid
[    3.542945] usbhid: USB HID core driver
[    3.544580] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:04.1/usb1/1-3/1-3.4/1-3.4:1.0/0003:093A:2516.0001/input/input3
[    3.544723] hid-generic 0003:093A:2516.0001: input,hidraw0: USB HID v1.11 Mouse [USB OPTICAL MOUSE] on usb-0000:00:04.1-3.4/input0
[    3.648062] usb 1-6: new high-speed USB device number 6 using ehci-pci
[    3.882435] usb 1-6: New USB device found, idVendor=0424, idProduct=2228
[    3.882439] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.882442] usb 1-6: Product: Flash Card Reader
[    3.882445] usb 1-6: Manufacturer: Generic
[    3.882448] usb 1-6: SerialNumber: 000022272228
[    3.882874] usb-storage 1-6:1.0: USB Mass Storage device detected
[    3.883000] scsi host7: usb-storage 1-6:1.0
[    4.386844] scsi 6:0:0:0: Direct-Access     Generic  Flash Disk       8.07 PQ: 0 ANSI: 2
[    4.388701] sd 6:0:0:0: [sdb] 7829504 512-byte logical blocks: (4.01 GB/3.73 GiB)
[    4.390064] sd 6:0:0:0: [sdb] Write Protect is off
[    4.390069] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[    4.391070] sd 6:0:0:0: [sdb] No Caching mode page found
[    4.391127] sd 6:0:0:0: [sdb] Assuming drive cache: write through                                                                        
[    4.433225]  sdb: sdb1 sdb2
[    4.437081] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    4.832072] floppy0: no floppy controllers found
[    4.832088] work still pending
[    4.924122] scsi 7:0:0:0: Direct-Access     Generic  Flash HS-CF      5.14 PQ: 0 ANSI: 0
[    4.927342] scsi 7:0:0:1: Direct-Access     Generic  Flash HS-MS/SD   5.14 PQ: 0 ANSI: 0
[    4.930826] scsi 7:0:0:2: Direct-Access     Generic  Flash HS-SM      5.14 PQ: 0 ANSI: 0
[    4.947968] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[    5.115102] sd 7:0:0:1: [sdd] Attached SCSI removable disk
[    5.118957] sd 7:0:0:2: [sde] Attached SCSI removable disk
[    5.252314] ISO 9660 Extensions: Microsoft Joliet Level 3
[    5.256698] ISO 9660 Extensions: RRIP_1991A
[    5.296952] loop: module loaded
[    5.360865] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    5.909410] random: crng init done
[    8.928053] floppy0: no floppy controllers found
[   10.051231] ip_tables: (C) 2000-2006 Netfilter Core Team
[   10.141493] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[   10.141687] systemd[1]: Detected architecture x86-64.
[   10.157867] systemd[1]: Set hostname to <localhost.localdomain>.
[   10.158884] systemd[1]: Initializing machine ID from random generator.
[   10.570778] systemd[1]: Listening on Journal Audit Socket.
[   10.570921] systemd[1]: Listening on Journal Socket (/dev/log).
[   10.570999] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   10.571020] systemd[1]: Reached target Swap.
[   10.571081] systemd[1]: Listening on udev Control Socket.
[   10.571150] systemd[1]: Listening on Journal Socket.
[   10.842719] lp: driver loaded but no devices found
[   10.859000] systemd-journald[396]: Received request to flush runtime journal from PID 1
[   10.871552] ppdev: user-space parallel port driver
[   11.036000] Loading iSCSI transport class v2.0-870.
[   11.157519] iscsi: registered transport (tcp)
[   11.427699] iscsi: registered transport (iser)
[   28.644333] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   28.690419] i2c i2c-4: nForce2 SMBus adapter at 0x4d00
[   28.690462] i2c i2c-5: nForce2 SMBus adapter at 0x4e00
[   28.738788] input: PC Speaker as /devices/platform/pcspkr/input/input4
[   28.821274] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   28.821404] sr 1:0:0:0: Attached scsi generic sg1 type 5
[   28.821473] sr 4:0:0:0: Attached scsi generic sg2 type 5
[   28.821533] sd 6:0:0:0: Attached scsi generic sg3 type 0
[   28.821601] sd 7:0:0:0: Attached scsi generic sg4 type 0
[   28.821663] sd 7:0:0:1: Attached scsi generic sg5 type 0
[   28.821750] sd 7:0:0:2: Attached scsi generic sg6 type 0
[   28.859839] coretemp coretemp.0: Using relative temperature scale!
[   28.859855] coretemp coretemp.0: Using relative temperature scale!
[   29.528535] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[   29.528556] snd_hda_intel 0000:00:09.0: Disabling MSI
[   30.802292] usb 1-1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested
[   30.802470] usbcore: registered new interface driver ath9k_htc
[   30.854631] usb 1-1: firmware: direct-loading firmware ath9k_htc/htc_9271-1.4.0.fw
[   30.904183] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC888: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[   30.904186] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   30.904189] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   30.904191] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   30.904192] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[   30.904194] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   30.904196] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[   30.904199] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[   30.904200] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[   30.904202] snd_hda_codec_realtek hdaudioC0D0:      Aux=0x1c
[   31.150864] usb 1-1: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008
[   31.402702] ath9k_htc 1-1:1.0: ath9k_htc: HTC initialized with 33 credits
[   31.664323] ath9k_htc 1-1:1.0: ath9k_htc: FW Version: 1.4
[   31.664326] ath9k_htc 1-1:1.0: FW RMW support: On
[   31.664328] ath: EEPROM regdomain: 0x809c
[   31.664329] ath: EEPROM indicates we should expect a country code
[   31.664330] ath: doing EEPROM country->regdmn map search
[   31.664331] ath: country maps to regdmn code: 0x52
[   31.664332] ath: Country alpha2 being used: CN
[   31.664333] ath: Regpair used: 0x52
[   31.711939] ieee80211 phy0: Atheros AR9271 Rev:1
[   31.738347] IPv6: ADDRCONF(NETDEV_UP): enp0s15: link is not ready
[   31.739003] forcedeth 0000:00:0f.0 enp0s15: MSI enabled
[   31.739237] forcedeth 0000:00:0f.0 enp0s15: no link during initialization
[   31.739650] IPv6: ADDRCONF(NETDEV_UP): enp0s15: link is not ready
[   31.767114] ath9k_htc 1-1:1.0 wlxa0f3c1229e1a: renamed from wlan0
[   31.811955] IPv6: ADDRCONF(NETDEV_UP): wlxa0f3c1229e1a: link is not ready
[   32.027921] IPv6: ADDRCONF(NETDEV_UP): wlxa0f3c1229e1a: link is not ready
[   32.210595] IPv6: ADDRCONF(NETDEV_UP): wlxa0f3c1229e1a: link is not ready
[   32.224072] floppy0: no floppy controllers found
[   32.224088] work still pending
[   32.371725] IPv6: ADDRCONF(NETDEV_UP): wlxa0f3c1229e1a: link is not ready
[   33.991639] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:09.0/sound/card0/input5
[   33.991837] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:09.0/sound/card0/input6
[   33.991996] input: HDA NVidia Line as /devices/pci0000:00/0000:00:09.0/sound/card0/input7
[   33.993698] input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:09.0/sound/card0/input8
[   34.000292] input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:09.0/sound/card0/input9
[   34.000497] input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:09.0/sound/card0/input10
[   34.000606] input: HDA NVidia Line Out Side as /devices/pci0000:00/0000:00:09.0/sound/card0/input11
[   34.000707] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:09.0/sound/card0/input12
[   37.537194] vboxdrv: loading out-of-tree module taints kernel.
[   37.538287] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[   37.544667] vboxdrv: Found 2 processor cores
[   37.548700] vboxdrv: fAsync=0 offMin=0x2da offMax=0x1b94
[   37.648941] vboxdrv: TSC mode is Synchronous, tentative frequency 1999947120 Hz
[   37.648942] vboxdrv: Successfully loaded version 5.1.10_Debian (interface 0x00280000)
[   37.676001] VBoxNetFlt: Successfully started.
[   37.685575] VBoxNetAdp: Successfully started.
[   37.696811] VBoxPciLinuxInit
[   37.707351] vboxpci: IOMMU not found (not registered)
[  151.092282] perf: interrupt took too long (2570 > 2500), lowering kernel.perf_event_max_sample_rate to 77750
[  243.519513] perf: interrupt took too long (3216 > 3212), lowering kernel.perf_event_max_sample_rate to 62000
[  255.462317] IPv6: ADDRCONF(NETDEV_UP): wlxa0f3c1229e1a: link is not ready
[  256.777425] wlxa0f3c1229e1a: authenticate with 00:8e:f2:a2:7c:c2
[  256.990196] wlxa0f3c1229e1a: send auth to 00:8e:f2:a2:7c:c2 (try 1/3)
[  256.992904] wlxa0f3c1229e1a: authenticated
[  261.992311] wlxa0f3c1229e1a: aborting authentication with 00:8e:f2:a2:7c:c2 by local choice (Reason: 3=DEAUTH_LEAVING)
[  263.537056] wlxa0f3c1229e1a: authenticate with 00:8e:f2:a2:7c:c2
[  263.809171] wlxa0f3c1229e1a: send auth to 00:8e:f2:a2:7c:c2 (try 1/3)
[  263.812250] wlxa0f3c1229e1a: authenticated
[  270.633819] wlxa0f3c1229e1a: authenticate with 00:8e:f2:a2:7c:c2
[  270.923896] wlxa0f3c1229e1a: send auth to 00:8e:f2:a2:7c:c2 (try 1/3)
[  270.930279] wlxa0f3c1229e1a: authenticated
[  271.991921] perf: interrupt took too long (4086 > 4020), lowering kernel.perf_event_max_sample_rate to 48750
[  275.924404] wlxa0f3c1229e1a: aborting authentication with 00:8e:f2:a2:7c:c2 by local choice (Reason: 3=DEAUTH_LEAVING)
[  278.321439] wlxa0f3c1229e1a: authenticate with 00:8e:f2:a2:7c:c2
[  278.571762] wlxa0f3c1229e1a: send auth to 00:8e:f2:a2:7c:c2 (try 1/3)
[  278.576857] wlxa0f3c1229e1a: authenticated
[  281.005593] wlxa0f3c1229e1a: aborting authentication with 00:8e:f2:a2:7c:c2 by local choice (Reason: 3=DEAUTH_LEAVING)
[  281.094216] IPv6: ADDRCONF(NETDEV_UP): wlxa0f3c1229e1a: link is not ready
[  281.295110] IPv6: ADDRCONF(NETDEV_UP): wlxa0f3c1229e1a: link is not ready
live@live-pc:~$

If you need something else, please ask.

Thanks for your time and interest.


RE: Unable to connect to wifi network in live session - Dah65 - 28th January 2017

From the laptop with dual boot Windows7/Maui I mentioned earlier, I try Netrunner Desktop Live session, and connect with wifi easily.

Output of inxi -v 2


Code:
live@live-pc:~$ inxi -v 2
System:    Host: live-pc Kernel: 4.8.0-1-amd64 x86_64 (64 bit) Desktop: KDE Plasma 5.8.2
          Distro: Netrunner 17.01 - Baryon
Machine:   Device: laptop System: ASUSTeK product: N61Jv v: 1.0
          Mobo: ASUSTeK model: N61Jv v: 1.0 BIOS: American Megatrends v: 220 date: 07/28/2010
Battery    BAT0: charge: 14.1 Wh 97.3% condition: 14.4/43.0 Wh (34%)
CPU:       Dual core Intel Core i5 M 450 (-HT-MCP-) speed/max: 1333/2400 MHz
Graphics:  Card-1: Intel Core Processor Integrated Graphics Controller
          Card-2: NVIDIA GT216M [GeForce GT 325M]
          Display Server: X.Org 1.19.0 drivers: nouveau (unloaded: fbdev,vesa) Resolution: 1366x768@60.00hz
          GLX Renderer: Mesa DRI Intel Ironlake Mobile GLX Version: 2.1 Mesa 13.0.2
Network:   Card-1: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) driver: ath9k
          Card-2: Qualcomm Atheros AR8131 Gigabit Ethernet driver: atl1c
Drives:    HDD Total Size: NA (-)
          ID-1: model: ST9640320AS
          ID-2: model: Flash_Disk
Info:      Processes: 204 Uptime: 31 min Memory: 958.7/3744.9MB Client: Shell (bash) inxi: 2.3.4
live@live-pc:~$

As you can see, the wifi card uses driver ath9k, and in this case it works perfectly. But when it is a wifi usb [ath9k_htc], the problem remains, even when I did
Code:
sudo modprobe -v ath9k
and

Code:
sudo modprobe -v ath9k_htc

I wish this information is helpful. I confess that I'm very confused right now.

I will try to install firmware-atheros from sid in a live session in the PC with the wifi usb to see what happens.


RE: Unable to connect to wifi network in live session - leszek - 28th January 2017

It might be a limitation coming from an older wireless package or this particular hardware in cooperation with the driver. Though I am not sure.
What you could try is disabling hardware crypto support.
To do this create a file in /etc/modprobe.d/ath9k_htc.conf with root rights (sudo) with the contents
Code:
options ath9k_htc nohwcrypt=1
Save the file and reboot.

I hope that this will fix the issue with your Wifi and that particular card.


RE: Unable to connect to wifi network in live session - Dah65 - 30th January 2017

Thanks for your suggestion. But I use this computer to do part of my daily work, so I'm reluctant to install a distro that may not function in such fundamental task.

In fact, I'm writing this post from the very same PC, in Maui Live session to verify what happens, and I can connect to my wifi with no trouble at all. So I think the issue is a bug in some package. Maybe the network-manager, because a friend of mine had a similar problem with Lubuntu 17.10, which of course doesn't use plasma-nm, in his laptop; sadly, I don't remember what wifi card was involved in his case.

All in all, I'll probably wait for the next Netrunner Desktop iso to try again.

Very grateful for your time and kind interest.


RE: Unable to connect to wifi network in live session - AJSlye - 31st January 2017

Is the Atheros AR9271 not a usb dongle?
Have you tried unpluging it from the computer, booting the live session, and then pluging it in afterwords?


RE: Unable to connect to wifi network in live session - Dah65 - 1st February 2017

Right now. Not success either.

As I've said, I think is a bug in Debian, because the same computer and wifi usb stick works out of the box in Maui Linux. Maybe I'll do another try with Sparky Linux KDE, which is Debian Testing based as well, to see what happens.


RE: Unable to connect to wifi network in live session - Dah65 - 5th February 2017

Writing this post from a live session in Sparky Linux (Debian Testing based). Packages versions are:


Code:
live@live:~$ sudo apt show plasma-desktop
Package: plasma-desktop
Version: 4:5.8.4-1
....
live@live:~$ sudo apt show libkf5activities5

Package: libkf5activities5
Version: 5.28.0-1
....
live@live:~$ sudo apt show libqt5quick5

Package: libqt5quick5
Version: 5.7.1-2
....
live@live:~$ sudo apt show network-manager

Package: network-manager
Version: 1.6.0-1
....
live@live:~$ sudo apt show wpasupplicant

Package: wpasupplicant
Version: 2.5-2+v2.4-3+b1
....
live@live:~$ sudo apt show firmware-atheros

Package: firmware-atheros
Version: 20161130-2
....
live@live:~$ lsmod | grep ath

ath9k_htc              65536  0
ath9k_common           32768  1 ath9k_htc
ath9k_hw              446464  2 ath9k_htc,ath9k_common
ath                    32768  3 ath9k_htc,ath9k_hw,ath9k_common
mac80211              651264  1 ath9k_htc
cfg80211              573440  4 ath9k_htc,mac80211,ath,ath9k_common
usbcore               249856  8 ath9k_htc,usbhid,usb_storage,ehci_hcd,ohci_pci,uas,ohci_hcd,ehci_pci

No trouble at all to connect with my wifi network, using the same computer an wifi usb stick. Besides, there is no any file under /etc/modprobe.d with a special configuration for ath9k_htc.

I hope this information would help you to improve Netrunner Desktop.


[Solved] Unable to connect to wifi network in live session - Dah65 - 3rd December 2017

Hello again.

The issue described at the beginning of this thread was present as well in Netrunner 17.06 and 17.10, but recently I did a new search in the internet to look for a solution, and I found one that worked in my case.

Sources I've found reporting the issue and the solution:

http://forums.debian.net/viewtopic.php?t=134322

https://askubuntu.com/questions/902992/ubuntu-gnome-17-04-wi-fi-not-working-mac-address-keeps-changing/905019#905019

https://linuxsuperuser.com/unable-connect-wifi-debian-and-ubuntu/

In short, it seems that wifi unable to connect  is due to the new privacy feature (MAC address randomization) in the new version of NetworkManager causing some wi-fi adaptors to stop working.

The solution that worked


Code:
sudo nano /etc/NetworkManager/conf.d/disable-random-mac.conf

In this file, I had to write

Code:
[device]
wifi.scan-rand-mac-address=no

and then, restart the NetworkManager


Code:
sudo systemctl restart NetworkManager

Hope this information is useful to someone else Rolleyes

I ask some administrator to mark this thread as "Solved", because I don't know how to do it myself